CONTROL SYSTEMS
Linear Actuator & Control System Applications
Explore electric motion and controls for your equipment.
Start with the movements your equipment needs. Use the application examples below to prepare the load, installation space and operating-control details for an actuator and control system review.

DENTAL
Dental Patient Chairs
- Height Adjustment
- Backrest Adjustment
Prepare: List the height and backrest movements, actuator quantity, supply voltage and preferred hand or foot operation. Include existing component labels and connector photos when replacing parts.
Check: Check mounting space and stroke for each movement, then confirm the control box connections and button or pedal functions against the same chair configuration.

MEDICAL & HEALTHCARE
Medical & Nursing Beds
- Lifting
- Reclining
- Positioning
Prepare: Describe each moving section, its load and mounting points. State which movements must operate independently or together, and list the controls available to the patient and caregiver.
Check: Ask for an actuator and control configuration tied to that movement list. If CPR, backup power or coordinated motion is required, request confirmation for the proposed configuration.

BEAUTY & WELLNESS
Beauty & SPA Beds
- Height Adjustment
- Backrest Adjustment
- Leg-Rest Adjustment
Prepare: List height, backrest and leg-rest adjustments separately, with the required load and adjustment time for each. Specify hand or foot operation and any requested comfort functions.
Check: Compare speed at the required load, not only no-load speed. Confirm the movement controls and any requested lighting or heating functions for the selected system.

PROCEDURE EQUIPMENT
Operation Beds & Tables
- Equipment Adjustment
- Motion Control
Prepare: Provide equipment drawings, the load and mounting space for each adjustment, and the intended operating sequence. State the target market and the equipment-level test requirements.
Check: Request configuration drawings and connection details before selecting a sample. Agree how movement, clearance and stopping behaviour will be checked on the equipment.

HOME ADJUSTMENT
Household Adjustable Beds
- Bed Adjustment
- Operating Controls
Prepare: Share the bed-frame layout, moving sections and available space below the frame. Describe the required adjustments, preferred handset functions and current prototype or drawing stage.
Check: Check retracted length and the space occupied throughout movement. Match each requested handset function to the proposed actuator and control box configuration.

INDUSTRIAL EQUIPMENT
Industrial Automation
- Linear Motion
- Positioning
Prepare: Describe the mechanism, push and pull loads, travel, required loaded speed and operating cycle. Include mounting direction, available space and the controller or signal requirements.
Check: Ask the supplier to review these requirements together. For positioning tasks, state the required accuracy and feedback; request evidence for the proposed model and configuration.
Prepare Your Selection with Product Documents
Use the same equipment requirements when comparing product data sheets and supplier replies. These resources help you record dimensions, review specifications and prepare questions.
Check Stroke and Installation Length
Record the mounting-point distance when retracted and extended, using the same reference points. Use the existing measurement guide before comparing a product drawing.
Compare the Required Operating Conditions
Prepare push and pull requirements, loaded speed, operating time and rest time. Ask for data that applies to the proposed configuration when the sheet does not show the required condition.
Review Model and Interface Documents
Find the model data sheet, then check drawings and connection information on the product page. For dental-chair sourcing, use the purchasing guide to compare supplier replies.
What to Include in Your Application Inquiry
Send the details you already have. If a parameter is not yet available, identify it and share a photo or sketch so the next review can focus on what is missing.
- Equipment and movements
- Equipment type, each required adjustment, and whether movements are independent or coordinated.
- Load and installation
- Push/pull requirements if known, required travel, mounting dimensions, and available drawings or photos.
- Power and operation
- Supply voltage, existing component models, preferred hand/foot operation, and connector photos.
- Project and documents
- Drawing or prototype stage, target market, intended sample quantity, and documents needed for evaluation.
For example: “We are developing a dental chair with separate height and backrest adjustment. Attached are the mounting sketch and existing actuator labels. We need foot operation; please review the required control box and connection details.”
Discuss Your Application
Tell us your equipment type and the movements you need.